Canon EOS 1Ds Mark III Instruction Manual Download

Page: 35 / 212

Remove the caps.

Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.

Attach the lens.

Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.

On the lens, set the focus mode
switch to <

If it is set to <

>, autofocus will not

be possible.

Remove the front lens cap.

While pressing the lens release
button, turn the lens as shown by
the arrow.

Turn the lens until it stops, then
detach it.

Mounting and Detaching a Lens

Mounting a Lens

Detaching the Lens

When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.

Not compatible with EF-S lenses.

Summary of Contents for EOS 1Ds Mark III





















































































































































































































Search results

Summary of Contents for EOS 1Ds Mark III

Reviews:

Related manuals for EOS 1Ds Mark III

Brands by name

Popular brands

Canon EOS 1Ds Mark III, Instruction Manual

Search results

Summary of Contents for EOS 1Ds Mark III

Reviews:

Related manuals for EOS 1Ds Mark III

Brands by name

Popular brands