Canon EOS 1Ds Mark III Page 139 Instruction Manual Download

Page: 139 / 212

139

Preparing to Print

Playback the image.

Press the <

> button.

The image will appear, and the <

icon will appear on the upper left to
indicate that the camera is connected
to a printer.

PictBridge

The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.

When connecting the camera to the printer, do not use any cable other
than the interface cable provided.

If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what’s wrong, do the following:
Press the <

> button to playback the image and follow the steps

below.

1. Press <

2. On the print setting screen, select [

Print

The error message will be displayed on the LCD monitor (p.146).

If you use a battery to power the camera, make sure it is fully charged.
With a fully charged battery, printing up to about 7 hours is possible.

Before disconnecting the cable, turn off the camera and printer first. Pull
out the cable while holding the plug, not the cord.

For direct printing, using AC Adapter Kit ACK-E4 to power the camera is
recommended.

Summary of Contents for EOS 1Ds Mark III





















































































































































































































Search results

Summary of Contents for EOS 1Ds Mark III

Reviews:

Related manuals for EOS 1Ds Mark III

Brands by name

Popular brands

Canon EOS 1Ds Mark III, Instruction Manual

Search results

Summary of Contents for EOS 1Ds Mark III

Reviews:

Related manuals for EOS 1Ds Mark III

Brands by name

Popular brands