Canon EOS 1Ds Mark III Instruction Manual Download

Page: 123 / 212

123

Protecting the image prevents it from being erased accidentally.

Playback the image to be
protected.

Protect the image.

During image playback, press the
<

> button.

When an image is protected, the
<

> icon will appear above the

image.

To cancel the image protection, press
the <

> button again. The <

icon will disappear.

To protect another image, repeat
steps 1 and 2.

To exit the image protection, press
the <

> button. The menu will

reappear.

You can protect all the images in the folder or memory card at one time.
When the [

Protect images

] menu is set to [

All images in folder

] or

[

All images on card

], all the images in the folder or card will be

protected.
To cancel the image protection, select [

Clear all images in folder

] or

[

Clear all images on card

Protecting Images

Protecting a Single Image

Protecting All Images in a Folder or Card

When you format the memory card, the protected images will also
be erased.

To protect the image, press and let go of the <

> button. Hold down

the button for about 2 sec. and the sound recording will start.

Summary of Contents for EOS 1Ds Mark III





















































































































































































































Search results

Summary of Contents for EOS 1Ds Mark III

Reviews:

Related manuals for EOS 1Ds Mark III

Brands by name

Popular brands

Canon EOS 1Ds Mark III, Instruction Manual

Search results

Summary of Contents for EOS 1Ds Mark III

Reviews:

Related manuals for EOS 1Ds Mark III

Brands by name

Popular brands