Canon EOS 1D Mark III Page 92 Instruction Manual Download

Page: 92 / 212

The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.

* <

> stands for Program.

* AE stands for Auto Exposure.

Press the <

> button.

(

)

Select <

Turn the <

> dial to select

Focus the subject.

Look through the viewfinder and aim
the selected AF point over the subject.
Then press the shutter button halfway.

The AF point which achieves focus
flashes in red, and the focus
confirmation light <

> in the

viewfinder’s bottom right lights.
(In the One-Shot AF + automatic AF
point selection mode)

The shutter speed and aperture will be
set automatically and displayed in the
viewfinder and on the top LCD panel.

Check the shutter speed and
aperture display.

A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.

: Program AE

Summary of Contents for EOS 1D Mark III





















































































































































































































Search results

Summary of Contents for EOS 1D Mark III

Reviews:

Related manuals for EOS 1D Mark III

Brands by name

Popular brands

Canon EOS 1D Mark III, Instruction Manual

Search results

Summary of Contents for EOS 1D Mark III

Reviews:

Related manuals for EOS 1D Mark III

Brands by name

Popular brands