Canon EOS 1D Mark III Instruction Manual Download Page 126

Page: 126 / 212

126

Copying Images

Select the image.

Turn the <

> dial to select the

image to be copied, then press <

The <

> icon will appear on the

upper left of the screen.

Press the <

> button to display the

three-image view. To return to the
single-image display, press the <

button.

To select another image to be copied,
repeat step 4.

Press the <

> button.

After selecting all the images to be
copied, press the <

> button.

Select [OK].

Check the target memory card and
press <

Select the target folder.

Turn the <

> dial to select the target

folder where the images are to be
copied to, then press <

To create a new folder, select [

Create

folder

Select [OK].

Check the copy source and copy
target’s information.

Turn the <

> dial to select [

then press <

Total images selected

Summary of Contents for EOS 1D Mark III





















































































































































































































Search results

Summary of Contents for EOS 1D Mark III

Reviews:

Canon EOS 1D Mark III, Instruction Manual, Page: 126 / 212

Search results

Summary of Contents for EOS 1D Mark III

Reviews: