Canon EOS 1300D (W), Wireless Function Instruction Manual

Page: 132 / 144

132
If the transmission rate drops, the connection is lost, movies are not
displayed smoothly, or other problems occur when using the wireless
functions, try the following corrective actions.

When using indoors, install it in the room where you are using the
camera.

Install it so that people or objects do not come between it and the
camera.
If the transmission rate of a wireless LAN drops because of the
influence of the following electronic devices, stop using them or move
further away from the devices to transmit communication.

The camera communicates over wireless LANs via IEEE 802.11b/
g/n using radio waves in the 2.4 GHz band. For this reason, the
wireless LAN transmission rate may drop if there are Bluetooth
devices, microwave ovens, cordless telephones, microphones,
smartphones, other cameras, or similar devices operating on the
same frequency band nearby.

When connecting multiple cameras to one access point, make
sure the cameras’ IP addresses are different.

When multiple cameras are connected to one access point, the
transmission rate drops.

When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access
points, leave a gap of four channels between each wireless LAN
channel to reduce radio wave interference. For example, use
channels 1, 6, and 11, channels 2 and 7, or channels 3 and 8.
Wireless Function Notes
Installation of the Target Device or an Access Point Antenna
Nearby Electronic Devices
Notes for Using Multiple Cameras