Canon EOS 1300D (W), Wireless Function Instruction Manual

Page: 125 / 144

125
Responding to Error Messages

Are any obstacles blocking the line of sight between the
camera and the target device or the antenna of the access
point?

Move the target device or the antenna of the access point to a
position clearly visible from the point of view of the camera (p.132).

Is the camera too far from the target device or the antenna of
the access point?

Bring the camera and the target device or the antenna of the
access point closer together.

The wireless connection was lost for some reason, and the
connection cannot be restored.

The following are possible reasons: excessive access to the
access point from other device, a microwave oven or similar
appliance in use nearby (interfering with IEEE 802.11b/g/n (2.4
GHz band)), or influence of rain or high humidity (p.132).

Are the camera and the access point set to use the same
encryption key for authentication?
 The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is set on the camera (p.85, 101).

Are the camera and the access point set to use the same
encryption method?
 The camera supports the following encryption methods: WEP,
TKIP, and AES (p.74, 92).

If filtering by MAC address is active, is the MAC address of the
camera used registered at the access point?
 Register the MAC address of the camera used at the access point.
The MAC address can be checked on the [
General sett. ] screen
(p.116).
65: Wireless LAN connection lost
66: Incorrect wireless LAN encryption key
67: Incorrect wireless LAN encryption method