Canon DVD CAMCORDER DC410 Instruction Manual Download

Page: 71 / 95

Additional Information

• 71

[TV TYPE]:

In order to display the picture in full and in the correct aspect ratio, select the

setting according to the type of television to which you will connect the camcorder.
[

NORMAL TV]: TV sets with 4:3 aspect ratio.

[

WIDE TV]: TV sets with 16:9 aspect ratio.

• If the camcorder is connected to a widescreen TV with the TV type set to

[

NORMAL TV], during the playback of video originally recorded with an aspect ratio

of 16:9, the picture will not be displayed full screen.

[FIRMWARE]:

You can verify the current version of the camcorder’s firmware. This menu

option is usually unavailable.

Date/Time Setup

DATE/TIME SETUP

[DATE FORMAT]:

Changes the date format for on-screen displays and, if this option is

selected, for the date printed on photos using Direct Print (

only).

Menu item

Setting options

CAMERA

PLAY

[T.ZONE/DST]

List of world time zones.

[DATE/TIME]

–

[DATE FORMAT]

[Y.M.D (2009.1.1 AM 12:00)],
[M.D,Y (JAN. 1, 2009 12:00 AM)],

[D.M.Y (1.JAN.2009 12:00 AM)]

–

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for DVD CAMCORDER DC410
































































































Search results

Summary of Contents for DVD CAMCORDER DC410

Reviews:

Related manuals for DVD CAMCORDER DC410

Brands by name

Popular brands

Canon DVD CAMCORDER DC410, Instruction Manual

Search results

Summary of Contents for DVD CAMCORDER DC410

Reviews:

Related manuals for DVD CAMCORDER DC410

Brands by name

Popular brands