Canon DP-V1830, Operation Manual

Page: 25 / 98

OSD Menu
25
Sub Menu Setting Options (Bold: factory default)
Detail Settings
CDL Export Exports CDL parameters.
CDL Preset CDL 1 to CDL 8
All
File Type CCC, CDL
Execute
CDL Import Imports CDL parameters.
Filename
CDL Preset CDL 1 to CDL 8
Execute
CDL Preset Name You can change the name of [CDL 1-8] within 16 characters including
alphabetical characters, numbers, and symbols.
Anchor CDL You can temporarily save parameters for [Power], [Saturation], [Offset],
and [Slope] and recover the values. (anchor point setting)
Reset CDL Resets CDL parameters.
l
When [User LUT 1-8] is selected
Select a preset of the 3D-LUT.
3D-LUT Selects the User LUT (3D-LUT) to apply and imports an external LUT (3D-LUT).
3D-LUT 3D-LUT 1 to 3D-LUT 8
Off Select the 3D-LUT (preset) saved in one of [User LUT 1-8].
LUT Import Same as [Detail Settings] [LUT Import], [LUT Name], [LUT Delete]
(
26)
• Cannot be set when [3D-LUT] [Off].
LUT Name
LUT Delete
Color Range Automatic , Manual Sets the method of color range conversion performed before and after
User LUT processing (input/output).
[Automatic]: The color range is automatically converted before and after
User LUT processing (input/output).
-
When [Color Range] [Limited] ( 23): [Input] is set to [Limited to
Full]. [Output] is set to [Full to Limited].
-
When [Color Range] [Full] ( 23)*: [Input] and [Output] are set to [Off].
* [SDI Full (4-1019)] is included.
[Manual]: Sets [Input] or [Output].