Canon Digital IXUS 90 IS Page 98 User Manual Download

Page: 98 / 226

To Cancel the AE Lock

Press the

button.

You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.

To Cancel the FE Lock

Press the

button.

In Movie mode, AE lock can also be set/canceled

(p. 79)

You can use the FE lock when using the flash.

Locking the Flash Exposure Setting

(FE Lock)

Available Shooting Modes

p. 220

Turn on the LCD monitor.

Press the button and select (Flash on).

Aim the camera at the subject on which you

wish to lock the exposure.

Press the shutter button halfway and press the

button.

•

The flash will pre-fire and

will display.

Re-aim the camera to compose the shot as

desired and press the shutter button fully.

Summary of Contents for Digital IXUS 90 IS



































































































































































































































Search results

Summary of Contents for Digital IXUS 90 IS

Reviews:

Related manuals for Digital IXUS 90 IS

Brands by name

Popular brands

Canon Digital IXUS 90 IS, User Manual

Search results

Summary of Contents for Digital IXUS 90 IS

Reviews:

Related manuals for Digital IXUS 90 IS

Brands by name

Popular brands