Canon Digital IXUS 90 IS Page 146 User Manual Download

Page: 146 / 226

144

In Playback mode, you can attach sound memos (up to 1 min.) to an
image. The sound data is saved in the WAVE format.

Attaching Sound Memos to Images

Select [Sound Memo].

Press the

button.

In the

menu, use the

button to select

Press the

button.

Select an image.

Use the or button to select an
image to which you wish to attach a
sound memo.

Press the

button.

•

The sound memo control panel will
display.

Record the memo.

Use the or button to select

Press the

button.

•

The elapsed time and the remaining
time display.

•

Pressing the

FUNC./SET

button

pauses the recording. Pressing it
again resumes recording.

•

Up to 1 minute of recordings can be
added to any one image.

•

Press the

MENU

button to end the

set up.

Volume (Adjust it with
the

button)

Elapsed Time/
Remaining Time

Sound Memo Panel

Summary of Contents for Digital IXUS 90 IS



































































































































































































































Search results

Summary of Contents for Digital IXUS 90 IS

Reviews:

Related manuals for Digital IXUS 90 IS

Brands by name

Popular brands

Canon Digital IXUS 90 IS, User Manual

Search results

Summary of Contents for Digital IXUS 90 IS

Reviews:

Related manuals for Digital IXUS 90 IS

Brands by name

Popular brands