Canon Digital IXUS 90 IS User Manual Download Page 141

Page: 141 / 226

139

lay

ba
ck/
E

sin

Removing Correction Frames

To correctly perform red-eye correction, take note of the
following (refer to the image in Step 2 on

page 138

- Adjust the correction frame size so that it only surrounds

the red-eye portion to be corrected.

- When there are several subjects with red-eye, be sure to

add one correction frame per subject.

Select [Remove Frame].

Use

the , ,

button

select [Remove Frame].

Press the

button.

Select a frame you wish to

remove.

Use the or button to select a
frame to remove.

•

The selected frame will appear in
green.

Delete the frame.

Press the

button.

•

The selected frame will disappear.

•

To continue deleting frames, return to Step 2.

•

When you finish deleting frames, press the

MENU

button.

Summary of Contents for Digital IXUS 90 IS



































































































































































































































Search results

Summary of Contents for Digital IXUS 90 IS

Reviews:

Canon Digital IXUS 90 IS, User Manual, Page: 141 / 226

Search results

Summary of Contents for Digital IXUS 90 IS

Reviews: