Canon DC411 Instruction Manual Download

Page: 28 / 95

28 •

Video

IMPORTANT

Observe the following precautions while
the DISC access indicator is on or
flashing. Failing to do so may result in
permanent data loss.

- Do not subject the camcorder to

vibrations or strong impacts.

- Do not open the disc cover and do not

remove the disc.

- Do not disconnect the power source or

turn off the camcorder.

- Do not change the operating mode.

NOTES

•

About the Power Save mode:

If [POWER

SAVE] is set to [

ON] (

70), the

camcorder will shut off automatically to
save power when it is powered by a
battery pack and is left without any
operation for 5 minutes. To restore the
power, turn the

switch toward

MODE and release it, or turn the
camcorder off and then on again.

• When recording in very loud places (such

as fireworks shows or concerts), sound
may become distorted or it may not be
recorded at the actual levels. This is not
a malfunction.

• The following may take longer with a disc

in VR mode than a disc in VIDEO mode.
- The time between turning on the

camcorder and being able to start
recording.

- The time between turning the

switch to

and the camcorder

shutting off.

Using the viewfinder

When recording in bright places it
may be difficult to use the LCD
screen. In such case, change the
brightness of the LCD screen (

23)

or use the viewfinder instead. Press

to activate the

viewfinder along with the LCD panel.
Close the LCD panel to use only the
viewfinder.

Adjust the viewfinder as necessary
with the dioptric adjustment lever.

VIEWFINDER

About the mode switch and recording programs

Set the mode switch to

to let the

camcorder adjust all the settings for you,
allowing you to just point the camcorder and
start shooting.

Set the mode switch to

to select one of the recording programs.

The Special Scene recording programs (

35) offer a convenient

way to select the optimal settings to match special recording
conditions; and with the flexible recording programs (

37) you can

set the shutter speed manually, or enjoy the flexibility to change other settings.

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for DC411
































































































Search results

Summary of Contents for DC411

Reviews:

Related manuals for DC411

Brands by name

Popular brands

Canon DC411, Instruction Manual

Search results

Summary of Contents for DC411

Reviews:

Related manuals for DC411

Brands by name

Popular brands