2.10 Common Center Adjustment
1. Receive the 1 line black/white pattern computer signal with
Computer1 [RGB]
mode.
2. Enter the service mode.
3. Project only green light component to the screen.
4. Select item no. “
13
” and change data value to obtain the minimum flicker on the
screen.
5. Project only red light component to the screen.
6. Select item no. “
14
” and change data value to obtain the minimum flicker on the
screen.
7. Project only blue light component to the screen.
8. Select item no. “
15
” and change data value to obtain the minimum flicker on the
screen.
2.11 Gamma Adjustment
[PC-gamma adjustment]
1. Receive the 16-step grey scale computer signal with
Computer1 [RGB]
mode.
2. Enter the service mode.
3. Connect an oscilloscope to test point “
TPVIDEOG
” (+) and chassis ground (–).
4. Select item no. “
16
” and change data value to adjust amplitude “a” to be
1.6
± 0.1V.
[AV-gamma adjustment]
1. Receive the 16-step grey scale video signal with
Video [Video]
mode.
2. Enter the service mode.
3. Connect an oscilloscope to test point “
TPVIDEOG
” (+) and chassis ground (–).
4. Select item no. “
16
” and change data value to adjust amplitude “a” to be
1.9
± 0.1V.
Fig. 3-10
(a)
white level
white level
Part 3: Adjustment
3-13
Summary of Contents for D78-5532
