Canon D78-5532, Service Manual, Page: 45 / 119

Part 3: Adjustment
3-2
1.2 Service Adjustment Menu Operation
[To enter the service mode]
To enter the “Service Mode”, press and hold the MENU and INPUT buttons on the
projector at the same time for more than 3 seconds, or press and hold the MENU button
on the remote control unit for more than 20 seconds.
The service menu appears on the screen as follows.
[To adjust service data]
Select the adjustment item no. by pressing the pointer UP or DOWN button , and
change the data value by pressing the VOLUME – or button . Refer to the
“Service Adjustment Data Table” for further description of adjustment group no., item
no. and data value.
[To exit the service mode]
To exit the service mode, press the POWER button on the projector or remote control
unit.
Fig. 3-1
INPUT
WARNING
LAMP REPLACE
MENU
POWER
KEY
STONE
SET
VOL VOL
+
-
Computer
70
100
35
Service Mode
TempA TempB TempC
Fan1Speed Fan2Speed Fan3Speed
32.10 43.21 45.67
97 105 79
Data value
Item No.
Input Mode
Version No.
Note :
This part of
display is
available at the
service mode
No.80 - 123.
TOP CONTROL