Canon D1250U2F - CanoScan USB Flatbed Scanner User Manual Download Page 6

Page: 6 / 69

chapter 1

Before You Begin

Glossary

Contents

Index

System Requirements

The hardware and software listed below is required to use ScanGear
CS-U.

Computer: IBM PC/AT compatible with built-in USB port(s)

OS: Windows XP (Home Edition, Professional)

Windows Millennium Edition
Windows 2000 Professional
Windows 98

Free Hard Disk Space: Approx. 10MB or more (before installation)

Display: 800 x 600 pixels or greater

Medium (16 bit)/ High Color (16 bit) or greater

Interface: USB2.0/1.1

On Windows 98, USB2.0 performance not guaranteed

CD-ROM Drive: Required

• Performance with USB2.0 expansion cards is only

limited with the ones Canon Inc. guarantees.
Please refer to the “Notes Regarding the USB2.0
Interface” sheet.

Note

Summary of Contents for D1250U2F - CanoScan USB Flatbed Scanner






































































Search results

Summary of Contents for D1250U2F - CanoScan USB Flatbed Scanner

Reviews:

Related manuals for D1250U2F - CanoScan USB Flatbed Scanner

Brands by name

Popular brands

Canon D1250U2F - CanoScan USB Flatbed Scanner, User Manual

Search results

Summary of Contents for D1250U2F - CanoScan USB Flatbed Scanner

Reviews:

Related manuals for D1250U2F - CanoScan USB Flatbed Scanner

Brands by name

Popular brands