manualshive.com logo in svg

Canon CS100, Instruction Manual, Page: 18 / 76

Share
Download
Canon CS100 Instruction Manual Download Page 18

17

J

Power Lamp Indicators

Perform the Connect Station operations as described below while looking at the TV 
screen and using the Connect Station remote control.

 

When Connect Station is connected via a wired LAN (p.16), the screens shown in 
steps 3 and 4 will not be displayed.

1

Press <

S

>.

2

Select the language.

 

Press the <

T

> key to select the 

language, then press <

S

>.

 

Depending on the selected 
language, a screen may appear 
prompting you to select your 
country or region. Select an area 
first, then select a country or region.

Connect

Station Status

Power Lamp

Indicator

Power on

Green (lamp on)

Power off

(Lamp off)

Standby

Orange (lamp on)

Updating the firmware

Green (blinking)

Error

Red (blinking)

Performing Initial Settings

Power button/Power lamp

 

Do not lift or move Connect Station when its power is on or it is standing by. Dropping 
Connect Station or hitting it against an object may damage its hard disk.

 

Disconnecting the power cord or DC plug when the power to Connect Station is on or 
Connect Station is standing by can lead to a malfunction. Before disconnecting the 
power cord or DC plug, check that the power lamp is off.

 

Before turning on the power, check that no card is inserted and that no camera/
camcorder is connected to the USB terminal.

 

If the power lamp is blinking in red, turn on Connect Station and check the TV screen to 
see the content of the error (p.28). If you cannot turn on Connect Station when the 
power lamp is blinking in red, contact the nearest Canon Service Center.

 

Even if it is standing by, Connect Station consumes as much power as it does when its 
power is on (p.66).

Summary of Contents for CS100













































































Reviews:

No comments