6
The following precautions are provided to prevent harm or injury to yourself and others. Make
sure to thoroughly understand and follow these precautions before using the product. If you
experience any malfunctions, problems, or damage to the product, contact the nearest Canon
Service Center or the dealer from whom you purchased the product.
Do not use a power supply other than a household power outlet of 100 VAC to 240 VAC (50
Hz or 60 Hz).
Do not touch the power plug or product during thunderstorms.
Do not use or store the equipment in dusty or humid places. This is to prevent a fire,
excessive heat, electrical shock, or burn.
Unplug the power plug periodically and clean off the dust around the power outlet with a dry
cloth. If dust accumulated around the power plug and the outlet becomes moist, it may cause a
fire.
Do not move the product with the AC adapter connected to it. Doing so may damage the
cable, causing a fire or electrical shock. Likewise, there is a risk of injury by getting caught
on other objects.
When the product will not be used for a prolonged period of time or during maintenance,
make sure to disconnect the power plug beforehand. Leaving or storing the product with the
power on may cause a fire due to an electric leakage or some other problem.
Do not disassemble or modify the product.
Follow the safeguards below for the power cord.
• Always insert the power plug all the way in.
• Do not use a cord whose wire is broken or insulation is damaged.
• Do not twist the cord forcibly.
• Do not put a heavy object on the power cord.
• Do not modify the power cord.
Do not handle a power plug with wet hands. Doing so may cause an electrical shock.
Do not leave any cords near a heat source.
Do not short-circuit the plug, terminal, or outlet with a metal material. Doing so may cause an
electrical shock, heat generation, or fire.
Do not pull the power cord when unplugging it (hold the power plug).
Do not use the provided AC adapter with any other device.
Do not use any AC adapter not specified in the Instruction Manual. Doing so may cause an
electrical shock, heat generation, a fire, or injuries.
Do not block the internal cooling outlet or inlet of this product. Heat accumulating inside may
cause a fire or malfunction.
If you drop the product and the casing breaks open to expose the internal parts, do not touch
the internal parts. There is a possibility of an electrical shock due to high voltage.
If excessive heat, smoke, or fumes are emitted, immediately unplug the power cord from the
product. Otherwise, it may cause a fire, heat damage, or electrical shock. Contact your
dealer or nearest Canon Service Center.
Do not allow water to enter the product or get the product wet. If the product gets wet, do not
use it. Otherwise, an electrical shock, burns, or fire may result.
Do not wipe the product, using paint thinner, benzene, or other organic solvents. Doing so
may cause fire or a health hazard.
Safety Precautions
Warnings: Follow the warnings below. Otherwise, death or serious
injuries may result.
Summary of Contents for CS100
Page 74: ...CPA U137 001 CANON INC 2015 ...
