Canon CRL3124N Instruction Manual Download

Page: 237 / 468

237

Using AF to Focus (AF Method)

Focus the subject.

Aim the AF point over the subject and
press the shutter button halfway.

When focus is achieved, the AF point
will turn green and the beeper will
sound.

If focus is not achieved, the area
frame will turn orange.

Take the picture.

Check the focus and exposure, then
press the shutter button completely to
take the picture (p.216).

If the camera does not focus the desired target subject with automatic AF
point selection, switch the AF method to zone selection or [

FlexiZone -

Single

] and refocus.

Depending on the [

1: Aspect ratio

], the number of AF points will

differ. At [

3:2

], there will be 31 AF points. At [

4:3

] and [

1:1

], there will be

25 AF points. And at [

16:9

], 21 AF points. Also, at [

16:9

], there will be

only three zones.

For movie shooting, there will be 21 AF points (or 25 AF points if
[

640x480

] is set) and three zones (or 9 zones if [

640x480

] is set).

Summary of Contents for CRL3124N





















































































































































































































































































































































































































































































Search results

Summary of Contents for CRL3124N

Reviews:

Related manuals for CRL3124N

Brands by name

Popular brands

Canon CRL3124N, Instruction Manual

Search results

Summary of Contents for CRL3124N

Reviews:

Related manuals for CRL3124N

Brands by name

Popular brands