Canon CRL3124N Page 449 Instruction Manual Download

Page: 449 / 468

449

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

— This manual contains important safety

and operating instructions for Battery Charger LC-E6 & LC-E6E.

2. Before using the charger, read all instructions and cautionary remarks on

(1) the charger, (2) the battery pack, and (3) the product using the battery

pack.

CAUTION

— To reduce risk of injury, charge only the Battery Pack LP-E6.

Other types of batteries may burst, causing personal injury and other

damage.

4. Do not expose the charger to rain or snow.

5. Use of an attachment not recommended or sold by Canon may result in

fire, electric shock, or personal injury.

6. To reduce risk of damage to electric plug and cord, pull by plug rather than

by cord when disconnecting charger.

7. Make sure cord is located so that it will not be stepped on, tripped over, or

otherwise subjected to damage or stress.

8. Do not operate the charger with damaged cord or plug - replace them

immediately.

9. Do not operate the charger if it has received a sharp blow, been dropped,

or otherwise damaged in any way; take it to a qualified serviceman.

10. Do not disassemble the charger; take it to a qualified serviceman when

service or repair is required. Incorrect reassembly may result in a risk of

electric shock or fire.

11. To reduce risk of electric shock, unplug charger from outlet before

attempting any maintenance or cleaning.

MAINTENANCE INSTRUCTION

Unless otherwise stated in this manual, there are no user serviceable parts

inside. Refer servicing to qualified serviceman.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

Summary of Contents for CRL3124N





















































































































































































































































































































































































































































































Search results

Summary of Contents for CRL3124N

Reviews:

Related manuals for CRL3124N

Brands by name

Popular brands

Canon CRL3124N, Instruction Manual

Search results

Summary of Contents for CRL3124N

Reviews:

Related manuals for CRL3124N

Brands by name

Popular brands