PAGE03
Drum set : Assembly Instructions
*Take note of where
the thick marker line is.
Upper part
Lower part
*Align the reverse sides and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
Inside
*Attach the back.
Wrapping the piece around
a thin cylindrical object will
result in a neater finish.
Align the seam lines and
insert the pieces inside
each other, and attach to
the specified position.
Assemble both the left
and right parts so that
their seams face outwards.
Face the seam line
inwards and insert the
piece to the position specified.
PAGE04
PAGE05
PAGE06
*Roll up and attach.
*Roll up and attach.
*Do not attach the
area marked with
the diagonal lines.
*After attaching, swivel the
pieces around as shown,
so that the seams face inwards.
*Attach the parts circled in blue
around the tom holder pipes so
that the pipes are held up vertically.
Seam line
Tom holder pipe
Tom-tom 13" x 10"
Bass drum
Bass drum
Align the marker lines on 6A
and 6B with the glue spots on
6C ~ 6H, and attach.
