PAGE02
Drum set : Assembly Instructions
Wrapping the piece around a can or other
cylindrical object will result in a neater finish.
Handy Hint:
PAGE02
PAGE03
Bass drum
Front side
Front side
Back side
Back side
*NB: Begin from the opposite side
to the seam.
Upper part
Front side
Front side
Back side
Back side
Align the marker lines on 3A
and 3B with the glue spots on
3C ~ 3H, and attach.
*Align the reverse sides and attach.
*NB: Align the thick marker line
with the upper part, and insert
it through to the front side.
Do not apply glue.
*Attach to the display stand later.
Before starting.
Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet
No.1~No.22). Work in order of these sheet numbers. (The parts for assembly are on pages 2 ~ 22.)
There are 384 parts in total, and each part is numbered according to its page.
Also, the glue spots on each part are marked with the number of the part to attach to them.
The numbers ~ in the Assembly Instructions indicate the order to attach parts. Follow
this order when attaching.
When one part has multiple spots to attach, or glue spots for attaching other pieces, colors
( ) and numbers are used to show the precise location and method for attaching.
Check the diagrams in the "Assembly Instructions" carefully for each part as you work.
Diagonal line
Seam
Bass drum
Lower part
Upper part
Upper part
*Take note of where
the thick marker line is.
