manualshive.com logo in svg

Canon Color Bubble Jet BJC-2000 Series, Service Manual

Share
Download
Canon Color Bubble Jet BJC-2000 Series Service Manual Download Page 90

Part 4: Technical Reference

4-22

BJC-2000

3.5 Paper Feed

3.5.1 Outline of the paper feed

1) Paper feed mechanism

The paper feed mechanism supplies paper from the built-in cut-sheet feeder.
The built-in cut sheet feeder is driven by the paper feed motor.  Paper stacked in the
sheet feeder is picked up and fed automatically.  Even thick paper like envelopes can
be fed automatically without selecting the paper type mechanically with the paper
selection lever.
When the paper is sensed by the paper end sensor, it is fed automatically by the
paper feed roller until it reaches the starting position for printing on the platen.
During printing, the paper is fed by the rotation of the paper feed roller.
The paper, after printing, is delivered by the eject roller.

2) Paper feed operation

It is not possible to perform paper feed operations with the printer, however, paper
ejection can be performed with the 

RESET button

, when delivered out.

Figure 4-18 Paper Feed Mechanism

Flag

Pick-Up Roller

BJ Cartridge

Paper End
Sensor

Pick-Up Roller Sensor

Spur

Eject Roller

Transmission Roller

Feed Roller

Pressure Roller

Summary of Contents for Color Bubble Jet BJC-2000 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands