manualshive.com logo in svg

Canon Color Bubble Jet BJC-2000 Series, Service Manual

Share
Download
Canon Color Bubble Jet BJC-2000 Series Service Manual Download Page 28

1.4 BJ Cartridge Container

The cartridge container is for storing unused BJ cartridges black, color, and photo, to
protect the head from damage.  When storing a BJ cartridge in this container, be sure
to close the cover.  When storing a color BJ cartridge, do not remove the  ink cartridges.
The BJ cartridge containers can be linked together

1.5 Consumables

1.5.1 BJ cartridges (Color, Black, Photo)

Replacement BJ cartridges are identical to those included with the printer.  Only the
packaging is different.

1.5.2 Ink cartridge (Color BJ cartridge)

Replacement ink cartridges are the same as those installed in the color ink cartridge
and black ink cartridge. Either cartridge can be used for half a year after the seal is
opened.

Part 2: Product Specifications

BJC-2000

2-4

Figure 2-3 BJ Cartridge Container

Color Ink Cartridge

Black Ink Cartridge

Figure 2-4 Ink Cartridges

Summary of Contents for Color Bubble Jet BJC-2000 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands