manualshive.com logo in svg

Canon Color Bubble Jet BJC-2000 Series, Service Manual

Share
Download
Canon Color Bubble Jet BJC-2000 Series Service Manual Download Page 26

1.2 Features

1.

Compact (desk-top size)
External dimensions: 370 mm W 

✕

191 mm D 

✕

161 mm H

Weight:

Approx. 2.4 kg (5.3 lbs) (excluding BJ cartridge and option)

2.

Only 

RESET button

on the operation panel (No LED and buzzer)

Errors will be displayed on the host computer monitor.  (The host computer should
be set to ECP or Nibble mode and use the BJ status monitor on Windows95/98.)

3.

New AC adapter

4.

High quality printing of 720 

✕

360 dpi (in both monochrome and color)

5.

Windows exclusive printer (used with the Canon original printer driver)

6.

Drop modulation technology adopted Color & Photo BJ cartridges

7.

Banner printing capability

8.

New image processing technology "Image Optimizer" supported by the driver.
(Image optimizer:  a function to reduce "jaggies" which occur when enlarging low
resolution images.)

9.

Improved printer driver color matching processing

10. Device ID and status response function compatible with Windows95 Plug & Play

(Responds to the device ID/status of nibble mode)

11. New leverless sheet feeder

12. New carriage (Two-positioned paper thickness lever.  Three positions for the BJC-

4400.)

13. High quality scanning using the optional color scanner cartridge (IS-22)

14. Cartridge container SB-21 packed with the printer (for BC-20/BC-21e/BC-22e

Photo)

Part 2: Product Specifications

BJC-2000

2-2

Summary of Contents for Color Bubble Jet BJC-2000 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands