Canon Color Bubble Jet BJC-1000 Series User Manual Download Page 68

Page: 68 / 112

4-10

Maintaining the Printer

Chapter 4

❍

Do not vigorously shake the cartridge while handling it.

❍

If you are using both the BC-05 Color BJ Cartridge and any other
BJ cartridge, make sure you store the cartridge not being used in the
Ink Cartridge Storage Box.

❍

Keep BJ cartridges in their sealed containers until you are ready to
use them.

❍

If spilled, the ink is difficult to remove. Therefore, it’s a good idea to
keep the BJ cartridges and BJ tanks out of the reach of children.

❍

Do not touch the print head area on the BJ cartridge. Ink may leak
out and cause stains.

Hold the BJ cartridge on the sides only. Do not touch the area around
the print head.

DO NOT TOUCH
THIS AREA

HOLD
HERE

Summary of Contents for Color Bubble Jet BJC-1000 Series

















































































































Search results

Summary of Contents for Color Bubble Jet BJC-1000 Series

Reviews:

Related manuals for Color Bubble Jet BJC-1000 Series

Brands by name

Popular brands

Canon Color Bubble Jet BJC-1000 Series, User Manual

Search results

Summary of Contents for Color Bubble Jet BJC-1000 Series

Reviews:

Related manuals for Color Bubble Jet BJC-1000 Series

Brands by name

Popular brands