Canon Color Bubble Jet BJC-1000 Series User Manual Download Page 50

Page: 50 / 112

Paper Handling

Chapter 3

Paper Handling

3-21

❍

Stack a sheet of plain paper behind the fabric sheet.

❍

Insert the sheet with the cloth side out (toward you) and
the open end up (away from the printer’s sheet feeder).

❍

Pinch the paper guide so it will move smoothly and slide
the paper guide snug against the left side of the sheet.

❍

Do not attempt to load more than one sheet at a time.

❍

Do not remove the film backing from the fabric sheet until printing
is completed.

❍

Do not touch the front side of the fabric sheet when your hands are
wet or dirty.

❍

Always handle the sheet by the edges. An unclean or scratched print
surface can adversely affect print quality.

Insert the

fabric sheet.

PRINT SIDE
(CLOTH SIDE)

OPEN END

PLAIN
PAPER

Summary of Contents for Color Bubble Jet BJC-1000 Series

















































































































Search results

Summary of Contents for Color Bubble Jet BJC-1000 Series

Reviews:

Related manuals for Color Bubble Jet BJC-1000 Series

Brands by name

Popular brands

Canon Color Bubble Jet BJC-1000 Series, User Manual

Search results

Summary of Contents for Color Bubble Jet BJC-1000 Series

Reviews:

Related manuals for Color Bubble Jet BJC-1000 Series

Brands by name

Popular brands