E24
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6-3. AUTOMATIC ADJUSTMENT OF THE MECHANICAL END
Set the zoom/focus operation change-over knob on the
bottom of the drive unit to SERVO position before starting the
automatic adjustment of the mechanical end.
Perform the following operation on the display and perform
the automatic adjustment of the mechanical end. Do not touch
operation rings, such as focus drive gear and drive gear during
the automatic adjustment.
NOTE
If "Auto-Adjustment: Error/Lens Interface: Non-Connected" appears when the mechanical end
adjustment is completed, contact Canon Inc. or Canon distributers & sales representatives.
1
Press the key and then press the key.
2
Press the key.
Adjustment begins.
The screen changes to
the mechanical end adjustment screen
.
3
Press the key and press the key.
Initial top screen
MENU
Set
Set
Set
[Adj]
[Adj] is highlighted.
[Trk]OFF
Shtl
A 1
A 2
MENU
IG: 50
A
Fr1P
Fr1P
[I-Tq]H
[Adj]
[Trk]OFF
Shtl
A 1
A 2
IG: 50
A
Fr1P
Fr1P
[I-Tq]H
Lens
AutoAdjust
OK? y/
n
The screen flashes during adjustment.
Auto-Adjustment:
Succeeded
Lens Interface:
Connected
The adjustment is completed.
When is pressed after the adjustment ends, the screen A returns.
Screen A
ZOOM
FOCUS
Zoom Operation Change-over Knob
Focus Operation Change-over Knob
REMOTE1
REMOTE2/
VIRTUAL
REMOTE3
MANU. SERVO
MANU. SERVO
Automatically adjust the mechanical end of the zoom, focus and iris of the lens body and drive unit.
Perform this adjustment if the drive unit is detached and reattached on the lens body again.
BT1-B051-E_E_CC.indd 24
2020/02/04 11:03:11
