E20
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual
lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while
referring to Section 6-2.
6-1. HOW TO DETACH THE DRIVE UNIT
1
Turn the camera and the lens power off.
2
Disconnect the 12-pin cable.
3
Detach the lens body from the camera.
4
Remove the three drive unit fixing screws.
5
Insert the removed screws (3) into the specified
screw holes (3) shown on the following seal in the
lens body.
Docking screw caution seal
Docking screw
caution seal
BT1-B051-E_E_CC.indd 20
2020/02/04 11:03:02
