E15
5 OPERATION
2.
How to operate the speed preset function
When the Sped switch is pressed, the zoom starts to move at the preset speed and to the determined
direction (toward telephoto angle or widest angle) stored in section 1 until the zoom reaches its end.
3.
How to cancel movement in Speed Preset
Movement in Speed Preset can be canceled by any of the following operations.
1
）
Press the "Sped" switch again.
→
Zoom movement stops.
2
）
Perform zoom operation with the zoom rocker seasaw / the Shtl, Fr1P, Fr2P, Fr1F, Fr2F switch.
5-1-7. Framing Preset
There are three framing preset types based on how the settings are combined.
［
Zoom
］
:
This enables a predetermined picture angle and movement speed (zoom speed) to be reproduced easily.
［
Focus
］
:
This enables a predetermined focus and movement speed (focus speed) to be reproduced easily.
［
Z+F
］
:
This enables the movement speed (focus speed, zoom speed) to a predetermined focus and picture
angle to be reproduced easily. It must be set on the information display.
NOTE
Up to two framing presets, Frame1 and Frame2, can be set in the memory. Only Frame1 is described in the
description given on the following pages. Frame1 is indicated as Fr1P.
The zoom and focus are controlled in such a way that they start and stop simultaneously.
Control content
Movement speed setting
Frame preset
control
Setting combinations
Zoom
Z+F
Focus
Fr1P, Fr2P
(speed settable)
The zoom moves at the preset speed.
Zoom operation
control
Focus operation
control
Zoom + focus
operation control
The zoom moves at the maximum speed.
The focus moves at the maximum speed.
The focus moves at the maximum speed.
The zoom and focus move at the
maximum speed.
The zoom and focus move at the preset speeds.
(maximum speed)
*1
1 :
*
Fr1F, Fr2F
How to set the zoom speed to the framing memory position
Movement speed to the framing position is selected by assigning the Fr1P or Fr1F switch.
Fr1P---------- For the preset speed setting
（
preset speed
）
(Assigned to the AUX switch at the factory.)
Fr1F----------For the maximum speed setting
（
fast speed
）
For details on how to assign the switches, refer to "5-6. Switch Operations".
Frame1:
ZSpeed:
800
Frame2:
Zoom
Preset
Zoom
The framing preset setting is changed on the Preset screen on the infor-
mation display. The Frame1 setting is changed to Zoom, Focus, or Z+F.
BT1-B051-E_E_CC.indd 15
2020/02/04 11:02:49
