Canon Cassette Feeding Unit-AM1 Service Manual Download Page 32

Page: 32 / 73

Removing the Pickup/Feed/Separation Roller

■ Preparation

1. Open the Cassette Right Lower Cover.

2. Remove the cassette (each paper source).

■ Procedure

1. Move the Pickup Guide Holder [1].

[1]

2. Pull out the Pickup Roller [2]/Feed Roller [3]/Separation Roller [4] while holding down the claw [1].

• 3 Claws [1]

[1]

[2]

[3]

[4]

NOTE:

Pickup Roller parts counter (Cassette 3/Cassette 4):

• Service Mode > COPIER > COUNTER > DRBL-2 > C3-PU-RL
• Service Mode > COPIER > COUNTER > DRBL-2 > C4-PU-RL

Feed Roller parts counter (Cassette 3/Cassette 4):

• Service Mode > COPIER > COUNTER > DRBL-2 > C3-FD-RL
• Service Mode > COPIER > COUNTER > DRBL-2 > C4-FD-RL

Separation Roller parts counter (Cassette 3/Cassette 4):

• Service Mode > COPIER > COUNTER > DRBL-2 > C3-SP-RL
• Service Mode > COPIER > COUNTER > DRBL-2 > C4-SP-RL

Removing the Cassette 3/4 Pickup Unit

■ Preparation

1. Pull out the cassette fully.

4. Parts Replacement and Cleaning

Summary of Contents for Cassette Feeding Unit-AM1









































































Search results

Summary of Contents for Cassette Feeding Unit-AM1

Reviews:

Related manuals for Cassette Feeding Unit-AM1

Brands by name

Popular brands

Canon Cassette Feeding Unit-AM1, Service Manual

Search results

Summary of Contents for Cassette Feeding Unit-AM1

Reviews:

Related manuals for Cassette Feeding Unit-AM1

Brands by name

Popular brands