Canon Cassette Feeding Unit-AM1, Service Manual

Page: 44 / 73

Software adjustment
Use the following service mode to make an adjustment.
1. Leading edge
COPIER > ADJUST > FEED-ADJ >
Service Mode Items Description of adjustment
REGIST 1/1 speed
REG-DUP1 1/1 speed, 2nd
REG-THCK 1/2 speed
REG-DUP2 1/2 speed, 2nd
As the input value is changed by 1, the margin on the leading edge of paper is changed by 0.1 mm.
2. Left edge
COPIER > ADJUST > FEED-ADJ >
Service Mode Items Description of adjustment
ADJ-C1 Cassette 1, front side
ADJ-C1RE Cassette 1, back side
ADJ-C2 Cassette 2, front side
ADJ-C2RE Cassette 2, back side
ADJ-C3 Cassette 3, front side
ADJ-C3RE Cassette 3, back side
ADJ-C4 Cassette 4, front side
ADJ-C4RE Cassette 4, back side
ADJ-MF Multi-purpose Tray, front side
ADJ-MFRE Multi-purpose Tray, back side
As the input value is changed by 1, the margin on the left edge of paper is changed by 0.1 mm.
3. If the service mode setting value has been changed, write down the new adjustment value on the service label.
<Reference: Standard value>
Leading edge: 4.0+1.5/-1.0 mm (front side, back side)
Left edge: 2.5+/-1.5 mm (front side)/2.5+/-2.0 mm (back side)
Feeding direction
COPIER>ADJUST>FEED-ADJ
ADJ-xx/ADJ-xxRE
+ -
+
-
㻯㻻㻼㻵㻱㻾㻪㻭㻰㻶㼁㻿㼀㻪㻲㻱㻱㻰㻙㻭㻰㻶
㻾㻱㻳㻵㻿㼀㻛㻾㻱㻳㻙㻰㼁㻼㻝
㻾㻱㻳㻙㼀㻴㻯㻷㻛㻾㻱㻳㻙㻰㼁㻼㻞
xx = C1/C2/C3/C4/MF
5. Adjustment
39