background image

139

4

Register

Camera

Ser

ver

and

Set

Recor

ding

Sc
hedule

Set Preset Tour

Check the settings and click 

OK

.

This returns to the 

Preset Tour Settings

dialog.

Test the Preset Tour

Check the 

Preset Tour

box and click 

Settings

.

The 

Preset Tour Settings

dialog appears.

Click 

Start Test

.

After clicking 

Start Test,

the Preset Tour is executed once and you can confirm the

operation.

Change the Preset Settings

Check the 

Preset Tour 

box and click 

Settings

.

The 

Preset Tour Settings

dialog appears.

Select a preset to change from the
list and click 

Edit

.

The 

Preset Tour (Edit)

dialog

appears.

For the selected preset, change the 

Speed (PT)

Speed (Z)

, or 

Pause (sec)

settings.

Check the settings and click 

OK

.

This returns to the 

Preset Tour Settings

dialog.

4

3

2

1

2

1

5

For VB-C300 and VB-C60, you can return the focus to the default
setting by checking the Focus is returned to default when the
camera is operated. option.

Tip

COP

Y

Summary of Contents for C50FSi - VB Network Camera















































































































































































































































































































Reviews: