Canon BJC6500 - BJC 6500 Color Inkjet Printer, Service Manual, Page: 38 / 115

2.3.8 Grease application points
Apply greases at the points shown below.
Apply a thin film of grease using the flat brush. For the Carriage Oil Pad, do not use a
brush but apply directly.
For disassembly and reassembly procedures, refer to the parts catalog.
Do not apply more than the specified amount of grease, especially to the
grease pad.
If grease gets on the wipers or caps, damage is likely to occur.
Part 2: MAINTENANCE BJC-6500
2-10
Figure 2-11 Grease Points
CAUTION
Grease Pad
Approx. 0.6 cc (Floil 946P)
Cam Sliding Surface
Approx. 24 mg (Molykote PG-641)
Cam Sliding Surface
Approx. 24 mg
(Molykote PG-641)
Feed Roller Gear Teeth
(apply to all teeth evenly)
Approx. 96 mg (Molykote PG-641)
Eject Roller Gear Teeth (apply to all teeth evenly)
Approx. 60 mg (Molykote PG-641)
Carriage Guide Frame Sliding Surface
(apply the proper amount of grease so as not to drip)
(Floil 946P)
Carriage Guide Frame Back Surface (apply
a thin coat of grease over the entire surface)
Approx. 48 mg (Molykote PG-641)
Paper Thickness Lever Sliding
Surface
Approx. 12 mg (Molykote PG-641)
Paper Thickness Lever Spring Sliding Surface
Approx. 12 mg (Molykote PG-641)
Feed Roller Sliding Surface
Approx. 12 mg (Molykote PG-641)
Feed Roller Sliding Surface
Approx. 12 mg (Molykote PG-641)
Slow-Down Gear Teeth
(apply to all teeth evenly)
Approx. 72 mg (Molykote PG-641)