manualshive.com logo in svg

Canon BJC6500 - BJC 6500 Color Inkjet Printer, Service Manual, Page: 109 / 115

Share
Download
Canon BJC6500 - BJC 6500 Color Inkjet Printer Service Manual Download Page 109

5-19

BJC-6500

Part 5: REFERENCE

REFERENCE

3. INSTALLATION

3.1 Installation

For detailed procedures, refer to the User's Manual.

3.1.1 Installation location

To ensure optimum performance, install the printer where there is adequate space.
The figure below illustrates the printer's outside dimensions.

3.2 Installation Procedures

To avoid problems regarding electrical differences between the computer and the
printer, after connecting the interface cable, connect the plug of the power cord to an
electrical outlet.

3.2.1 Connecting the interface cable

1) Make sure both the printer and the computer are switched OFF.
2) Connect the interface cable to the interface connector on the printer.  Lock the
connector clips.
3) Connect the other end of the interface cable to the computer, and lock into place.

3.2.2 Connecting the power supply

1) Connect the plug of the power cord to a wall outlet.
2) Press the printer's POWER button. The beeper sounds once and the indicator

blinks in green indicating that the printer is in the initialization process.  After
initialization, the indicator lights in green.  If BJ cartridges are not installed, the
indicator lights in orange, the beeper sounds six times, and the carriage moves to
the cartridge replacement position.

Approx. 275 mm

Approx. 270 mm

Approx. 470 mm

Approx. 195 mm

Figure 5-21 Printer Dimensions

Summary of Contents for BJC6500 - BJC 6500 Color Inkjet Printer




















































































































Reviews:

No comments