manualshive.com logo in svg

Canon BJC-S200, Quick Start Manual, Page: 43 / 56

Share
Download
Canon BJC-S200 Quick Start Manual Download Page 43

39

Appendix

Installing the Printer Driver

If you are re-installing the printer driver, first follow the uninstall procedures on 
page 41 to remove the existing printer driver before you re-install.

To install the printer driver in Windows:

When installing the printer driver in Windows XP/Windows 2000, 
log on to the system as a member of the 

Administrators

 group.

1.

Unplug the printer.

2.

Make sure the USB cable between the printer and computer is securely 
connected.

3.

Turn the computer on, and close any open software applications. Insert the 
S200 Setup Software & User’s Guide CD-ROM in the CD-ROM drive. The setup 
program should run automatically.

If the printer was on when the setup program started, the Add 
New Hardware Wizard will appear. Do NOT use the wizard—click 

Cancel

 to close the window and continue.

If the setup program does not run automatically, click 

Start

, then 

Run

, then type 

x:\msetup.exe

 (where

 x

 is the CD-ROM drive).

4.

Read the License Agreement, then click 

Yes

, if you agree.

If a message prompts you to restart Windows, remove the 
CD-ROM, then click 

OK

. After the computer restarts, re-insert the 

CD-ROM and continue.

5.

When the main menu appears, ensure that the printer driver is selected and 
click 

Install

. The printer driver will start loading automatically.

S200 QS.book  Page 39  Tuesday, September 18, 2001  9:02 AM

Summary of Contents for BJC-S200

























































Reviews:

No comments