manualshive.com logo in svg

Canon BJC-S200, Quick Start Manual, Page: 32 / 56

Share
Download
Canon BJC-S200 Quick Start Manual Download Page 32

28

Printing Maintenance

To clean the printhead in Mac OS:

1.

Make sure the printer is on.

2.

In a software application, click 

File

, then 

Page Setup

.

3.

Click 

Utilities

. The Canon S200 Printer Utility window will appear.

4.

Select 

Cleaning

 from the drop-down 

menu, then click the 

Cleaning

 icon. 

5.

When a confirmation message is 
displayed, click 

OK

. The printer will 

clean the printhead.

6.

After the cleaning, print a nozzle 
check pattern to check the results. 
See “Printing a Nozzle Check 
Pattern” on page 25.

7.

If there is no change in the nozzle check pattern after cleaning, perform a 
printhead deep cleaning by choosing 

Cleaning

 from the drop-down menu and 

clicking the 

Deep Cleaning

 icon. When finished, print a nozzle check pattern 

to verify that the printhead is clean. 

If the printhead is not clean after deep cleaning, repeat steps 1–5 
two more times. If the printhead is still not clean, contact the 
Customer Care Center. (See page 38.)

S200 QS.book  Page 28  Tuesday, September 18, 2001  9:02 AM

Summary of Contents for BJC-S200

























































Reviews:

No comments