Canon BJC-6200, Service Manual

Page: 31 / 80

5200 Cause: Faulty temperature sensor in the BJ
cartridge.
Suspect: BJ cartridge, control board
5600 No cartridge error Cause: The cartridge cannot be detected other
than at the cartridge replacement position.
Suspect: Cartridge, control board, carriage
board, carriage ribbon cable.
Improper contact between cartridge and carriage.
5700 ASF sensor error Cause: During the pick-up operation, the pick-up
roller does not rotate, or, the pick-up roller
sensor cannot detect the pick-up roller flag.
Suspect: Sheet feeder unit, purge unit, control
board
5210 Scanner cartridge error Cause: Faulty data in the scanner cartridge.
Suspect: Scanner cartridge, control board
5000 Recovery system error Cause: While AP motor or LF motor runs, the
PG sensor does not turn ON or OFF.
Suspect: Purge unit, AP motor, LF motor,
control board
Internal Error
--- Ink sensor Cause: The check by the ink sensor during
initialization indicates that ink is available when
there is none. The ink sensor does not check the
ink until the AC power is turned off. In this case,
the ink compartment is always recognized to
have ink.
Suspect: Control board, ink sensor, ink tank,
EEPROM
Print head temperature sensor
(diode sensor) error
2-9
BJC-6200
Part 2: Troubleshooting
T
roub
leshooting
8 times in
orange/green
9 times in
orange/green
10 times in
orange/green
11 times in
orange/green
12 times in
orange/green
No error
indication
error***