Canon B180C, User Manual

Page: 67 / 139

6-12
Sequential broadcasting
Sending a document to more than one location
Sequential broadcasting sends one document to more than one location.
You can send to a total of 113 locations as follows:
One-touch speed dialling = 12 locations
Coded speed dialling = 100 locations
Regular dialling (Numeric buttons dialling) = 1 location
You can enter the one-touch speed dialling, coded speed dialling and regular dialling locations in any order.
Remember that when using regular dialling, you must press [Set] after entering the number.
You can send up to 20*A4-size pages.
1
Load the document face down into the Automatic
Document Feeder (ADF).
See Loading documents, p. 3-3.
You can set the scanning resolution and contrast. (see p. 6-2)
2
Dial the receiving party’s fax number.
• You can also press [Redial/Pause] to redial the last number
dialled with the numeric buttons.
• You must press the second button within 5 seconds of the
first one, and each subsequent button within 10 seconds of
the preceding one. The fax begins the operation
approximately 10 seconds after you press the last button.
3
Press [Start].
• The fax reads the document into memory and begins
sending.
• To cancel a transmission, press [Stop] during dialling or
transmission. All transmissions in the sequence are
cancelled.
DOCUMENT READY
TEL= 34567890
Start / Resume
TX/RX NO. 0007
1 sec.
SCANNING P.001
* A maximum of 42 pages (Canon FAX Standard Chart No.1, standard resolution) can be scanned into fax memory. A
maximum of 20 pages can be loaded into the ADF.