Guidance and manufacturer’s declaration for EMD
53
The AX-B3543W is intended for use in the electromagnetic environment specified below.
The customer or the user of the AX-B3543W should assure that it is used in such an
environment.
Table 1
*
1: Applies to regions where the rated voltage is 220 V or higher. Not applicable to regions where the
rated voltage is less than 220 V.
Electromagnetic emissions
Emission Test
Compliance
Electromagnetic
Environment – Guidance
RF emissions
CISPR11
GROUP 1
The AX-B3543W uses RF energy
only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby
electromagnetic equipment.
RF emissions
CISPR11
Class A
The AX-B3543W is suitable for use in
all establishments other than
domestic and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
*1
000_DIA-2019-001-E04_AX-B3543W.book Page 53 Friday, November 27, 2020 12:25 PM
Summary of Contents for AX-B3543W
