Canon AS-100M, Field Service Manual

Page: 122 / 136

<BIAS>
Represents bias at program loading with designation of a numeric
value in hexadecimal and within four digits. The name of the
register is a designatable for a numeric value.
<BRK>
Signifies break point with designation been the same as
<ADDR>.
<CR>
Key entry of carriage return.
<CR/,>
For key entry of carriage return or comma. When the carriage return key
is entered, y-debugger is waiting for command entry. On the other hand,
if comma key is entered, the same command will be executed at succeeding
address. The succeeding address remarked here signifies the following.
. Current a1 (however, I and 0 commands are excluded) in
the case of the byte access command.
. Current address 4*2 in the case of the word access command.
. Current address 4* number of bytes of the executed command in
the case of the single step command.
<CS:IP>
For display message with contents of code segment and instruction
pointer displayed in hexadecimal and within four digits.
7-16