Canon Arizona 6100 XTHF Mark II Series, User Manual, Page: 74 / 234

Network Connection Settings
• Network Name
• Network Adapter Name
• MAC Address
• Network Status
• IP Address is assigned automatically (See DHCP note)
• IP Address
• Subnet Mask
• Default Gateway
• [HTTPS proxy]
• [HTTPS proxy authentication]
NOTE
A network name for the printer cannot consist of numeric characters only - it must be a mix of
alpha-numeric characters. If the Printer name is changed, the printer must be restarted for the
change to take effect. If any settings require a printer restart, a reminder will be displayed when
that settings is selected.
NOTE
Typically, DHCP is used to automatically obtain network settings. If IP is assigned automatically.
If you choose NO, then you must set the IP yourself. The only thing you might want to change is
the network name of the printer. The settings are displayed to troubleshoot possible network
connection problems. One situation that would require changes is if your network does not use
DHCP to automatically obtain network settings. In this case network settings have to be entered
manually. If you don't know how to do this, bring in a network consultant to determine what the
setting must be for the network (alternately, you can purchase a DHCP router for your network
that will automatically supply the network settings - most modern modems use DHCP).
Settings Module
74 Chapter 3 - How to Navigate the User Interface