Canon Arizona 6100 XTHF Mark II Series, User Manual, Page: 221 / 234

Conformity declaration for Radio devices (USA and Canada)
• This equipment contains a certified modular transmitter. The modular transmitter is located in
Ink bay and can only be accessed by a service technician.
• The transmitter’s FCC ID is U2P-3010120604 , the IC ID is 22117-3010120604 .
Laser Safety (All countries)
• Laser safety
This is a digital machine which operates using a laser. There is no possibility of danger from
the laser provided that the machine is operated according to the instructions in this User
Documentation. Since radiation emitted by the laser is completely confined within the
protective housing, the laser beam cannot escape from the machine during any phase of user
operation. This machine is certified as a Class 1 laser product according to IEC60825-1 2014:
the machine does not produce hazardous laser radiation.
• CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard
according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser
products marketed in the United States and is reported to the Centre for Devices and
Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department
of Health and Human Services (DHHS). This means that the device does not produce
hazardous laser radiation. The related label indicates compliance with the CDRH regulations
and must be attached to laser products marketed in the United States.
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this
User Documentation may result in hazardous radiation exposure. This is a semiconductor
laser. The maximum power of the laser diode is
0.5 mW .
Mercury (All countries)
One or more lamp(s) inside this product contain(s) mercury. Dispose these lamp(s) in accordance
with all federal, state and local regulations.
Mercury (USA and Canada)
One or more lamp(s) inside this product contain(s) mercury and must be recycled or disposed of
in accordance with local, municipal, state, provincial or federal laws. For lamp recycling and
disposal information please call 1-800-OK-Canon for the U.S. and Canada.
Mercury (EEA including Switzerland)
Mercury containing lamp(s) must be removed and treated separately according Directive
2012/19/EU (Waste Electrical and Electronic Equipment). European Waste Catalogue (EWC)
number of the mercury containing fluorescent lamp: 20 01 12.
Lamps (All countries)
This product may contain lamps that are only intended for use in combination with and for this
specific product (and related equipment), and such lamps are not intended for use in other
applications.
Chapter 12 - Regulation Notices 221