Item
Specification
Saddle stitch capacity
• Saddle stitch: 25 sheets (including 1 cover sheet up to
300 g/m² (110 lb cover))
• Saddle fold: 5 sheets
• Paper sizes: A3, B4, A4R, 13" x 19" (330.2 mm x 482.6
mm), 12" x 18" (304.8 mm x 457.2 mm), 11" x 17"
(279.4 mm x 431.9 mm), LGL, LTRR, 12 5/8" x 17 3/4"
(320 x 450 mm), and custom sizes (210 mm x 297.1
mm to 330.2 mm x 487.7 mm (8.3" x 8.5" to 13" x
19.2")):
• Cover weight: Use heavier paper than the main docu-
ment (> 64 g/m² (17 lb bond)).
NOTE
The available saddle stitch capacity may vary,
depending on the paper type and weight).
Power source
120 - 240 V AC, 50/60 Hz, 8.0 A
Maximum power consumption
500 W
Dimensions (H x W x D)
1,239 mm x 800 mm x 792 mm (48.8" x 31.3" x 31.2")
NOTE
When the auxiliary booklet tray is pulled out,
the width is 1,060 mm (41.7").
Weight
Approximately 180 kg (397 lb)
Puncher Unit-BT1
NOTE
Whenever a number of sheets is mentioned in the table below, the figure is based on media of
80 g/m² (20 lb bond).
Specifications of Puncher Unit-BT1
Item
Specifications
Paper size/weight/type
Size:
• Two holes: A3, B4, A4, A4R, B5, B5R, and custom sizes
(182 mm x 182 mm to 297 mm x 432 mm (7.2" x 7.2"
to 11.7" x 17")).
• Four holes: A3, B4, A4, B5, and custom sizes (257 mm
x 182 mm to 297 mm x 432 mm (10.1" x 7.2" to 11.7" x
17")).
Weight: 52 g/m² - 300 g/m² (14 lb bond - 110 lb cover)
Type: Thin, Plain, Heavy, Recycled, Colour, Bond paper,
Tab paper, Coated, Texture paper, Carbonless
Number of punch holes, hole diame-
ter
• Two holes: 6.5 mm (0.26")
• Four holes: 6.5 mm (0.26")
Distance between punch holes
• Two holes: 80 mm (3.15")
• Four holes: 80 mm (3.15")
4
Specifications
58
Appendix A - Miscellaneous
Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1
