Canon 9540A003 - Optura 400 Camcorder Instruction Manual Download

Page: 154 / 166

154

Memory Card Operation

Memory card was not facing
the correct direction.

Memory card is full.

Memory card is not formatted.

Memory card is not inserted.

File number reached
maximum value.

SD Memory Card is
protected.

Camcorder is not set to
CARD PLAY mode.

Memory card is not inserted.

The camcorder displays the
still image playback mode.

The movie was recorded in
Motion JPEG format with
another camcorder.

Image is protected.

SD memory card is
protected.

Card error occurred.

Turn the memory card over
and reinsert it.

Replace the memory card or
erase images.

Format the memory card.

Insert a memory card.

Set [FILE NUMBERS] to
[RESET] and insert a new
memory card.

Change the position of the
protect switch.

Set the camcorder to CARD
PLAY mode.

Insert a memory card.

Press the CARD STILL/MOVIE
button to switch to MPEG-4
movie playback.

Motion JPEG movies are
displayed in still image
playback mode. Press the
CARD STILL/MOVIE button to
switch to still image playback.

Cancel the protection.

Change the position of the
protect switch.

Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.

Memory card cannot be
inserted.

Memory card cannot be
recorded.

Memory card cannot be
played back.

Camcorder does not
display movies in CARD
PLAY mode.

Image cannot be erased.

“ ” flashes red.

120

111

114

120

The camcorder is set to
NETWORK mode.

The camcorder displays the
movie playback mode.

[ CONNECT] is set to
[STORAGE].

111

134

1. Set the camcorder to

CARD PLAY mode.

2. Disconnect and reconnect

the USB cable.

3. Turn off the printer and

turn it back on.

Press the CARD STILL/MOVIE
button to display the still
image playback mode.

Set [ CONNECT] to
[STANDARD].

The printer is not
operating even though
camcorder and printer
are correctly connected.

Printing

Shaded area : OPTURA500 only.

Summary of Contents for 9540A003 - Optura 400 Camcorder







































































































































































Search results

Summary of Contents for 9540A003 - Optura 400 Camcorder

Reviews:

Related manuals for 9540A003 - Optura 400 Camcorder

Brands by name

Popular brands

Canon 9540A003 - Optura 400 Camcorder, Instruction Manual

Search results

Summary of Contents for 9540A003 - Optura 400 Camcorder

Reviews:

Related manuals for 9540A003 - Optura 400 Camcorder

Brands by name

Popular brands