manualshive.com logo in svg

Canon 9540A003 - Optura 400 Camcorder, Instruction Manual

Share
Download
Canon 9540A003 - Optura 400 Camcorder Instruction Manual Download Page 104

104

Recording Movies on a Memory Card

The OPTURA500 records movies in MPEG-4 format. The OPTURA400 records movies in

Motion JPEG format. The sound of a movie will be monaural.

1. Press the start/stop button to begin recording.

•

You can record until “CARD FULL” appears

(approx. 173 minutes with a 512 MB memory card).

•

With SD Memory Cards up to 512 MB, you can

record until “CARD FULL” appears (approx. 33 minutes with a

512 MB SD Memory Card). With MultiMediaCards, the recording time is limited to

10 sec. in 320 

×

240 pixels and 30 sec. in 160 

×

120 pixels.

2. Press the start/stop button to stop recording.

❍

Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.

❍

When you are using a SD Memory Card, make sure that the protect switch is
set to allow recording.

❍

Do not load/unload a cassette during recording.

❍

We recommend using a Canon SD Memory Card, or a SD Memory Card with a
transfer rate of more than 2 MB/sec., right after you have formatted it with
this camcorder. With memory cards not formatted with this camcorder, or
when recording/erasing has been repeatedly performed, the writing speed may
be lower and recording may stop.

❍

You can select the focusing point when recording a movie on the memory
card.

❍

Users of Windows XP: When you plan to connect the camcorder

to a computer, keep the length of one movie shorter than approx. 12 min. in
320

×

240 and 35 min. in 160 

×

120.

Recording from a Tape in the Camcorder

1. Play back the tape.

2. Press the start/stop button when the scene you wish to record appears.

3. Press the start/stop button to stop recording.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

Summary of Contents for 9540A003 - Optura 400 Camcorder







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands