Canon 600EXII-RT Instruction Manual Download Page 57

Page: 57 / 148

Wireless Flash Photography:

Radio Transmission

This chapter describes wireless flash photography

using the radio transmission wireless master/slave

function.

For the accessories required for radio transmission

wireless shooting, see the system map (p.122).

For the regions of use, restrictions, and precautions
related to radio transmission, see page 139.

When the camera’s shooting mode is set to a fully automatic
mode or a Basic Zone mode, the operations in this chapter are
not available. Set the camera’s shooting mode to <

bulb(B)

> (Creative Zone mode).

The procedures for wireless flash photography are described,
using the 600EX II-RT for both the master and slave unit.

The 600EX II-RT attached to the camera is called “master”,
and the 600EX II-RT controlled wirelessly is called “slave”.

Summary of Contents for 600EXII-RT





















































































































































Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands

Canon 600EXII-RT, Instruction Manual

Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands