Canon 600EXII-RT Instruction Manual Download Page 39

Page: 39 / 148

: Setting the Flash Coverage

When you use the flash’s built-in wide panel together, you can perform
flash photography covering the angle of view of an ultra-wide angle lens
with focal length as wide as 14 mm.

Pull out the wide panel.

Pull out the protruding area located in
the center of the wide panel.

The white catchlight panel is pulled
out at the same time.

Push back the catchlight panel.

Push back the catchlight panel only,
keeping the wide panel down.

Wide Panel

Since underexposure may occur, the <

> warning is displayed on

the LCD panel when using the wide panel with bounce flash.

Do not pull out the wide panel with excessive force. Doing so may detach
the wide panel from the Speedlite.

Angle of view of EF15mm f/2.8 Fisheye or EF8-15mm f/4L Fisheye USM
is not supported.

The flash coverage is set automatically when using the wide panel. You
cannot change the setting. (When the <

[

> button is pressed, <

WIDE

PANEL

> is displayed.)

Summary of Contents for 600EXII-RT





















































































































































Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands

Canon 600EXII-RT, Instruction Manual

Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands