Canon 600EXII-RT Instruction Manual Download Page 89

Page: 89 / 148

Wireless Flash Photography:

Optical Transmission

This chapter describes wireless flash photography

using the optical transmission wireless master/slave

function.

For the accessories required for optical transmission

wireless shooting, see the system map (p.122)

When the camera’s shooting mode is set to a fully automatic
mode or a Basic Zone mode, the operations in this chapter are
not available. Set the camera’s shooting mode to <

bulb(B)

> (Creative Zone mode).

The procedures for wireless flash photography are described,
using the 600EX II-RT for both the master and slave unit.

The 600EX II-RT attached to the camera is called “master”,
and the 600EX II-RT controlled wirelessly is called “slave”.

Summary of Contents for 600EXII-RT





















































































































































Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands

Canon 600EXII-RT, Instruction Manual

Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands