Canon 5169B003 User Manual Download Page 312

Page: 312 / 324

Quick Reference Guide

312

Set the Mode Dial to <

You can change the camera

settings as desired to shoot in

various ways.

The camera automatically sets the shutter speed and
aperture in the same way as the <

> mode.

Creative Zone Modes

: Program AE

Set the Mode Dial to <

Turn the <

> dial to set the

desired shutter speed, then focus the
subject.

The aperture will be set automatically.

If the aperture display blinks, turn the

> dial until it stops blinking.

Set the Mode Dial to <

Turn the <

> dial to set the desired

aperture, then focus the subject.

The shutter speed will be set

automatically.

If the shutter speed display blinks, turn

the <

> dial until it stops blinking.

: Shutter-priority AE

: Aperture-priority AE

ive

Summary of Contents for 5169B003





































































































































































































































































































































Search results

Summary of Contents for 5169B003

Reviews:

Related manuals for 5169B003

Brands by name

Popular brands

Canon 5169B003, User Manual

Search results

Summary of Contents for 5169B003

Reviews:

Related manuals for 5169B003

Brands by name

Popular brands